ACTEL M2S090TS-FGG484I

The ACTEL M2S090TS-FGG484I is the Trusted Security variant of the SmartFusion2 SoC FPGA family — engineered for applications where programmable logic integration and hardware-rooted data security must coexist on a single device. Built on a 65nm nonvolatile flash process with 86,184 logic cells and a hardened ARM Cortex-M3 processor, it addresses a design challenge that standard SoC FPGAs cannot solve without external security components: delivering cryptographic key generation, tamper response, and DPA-resistant encryption directly from silicon, with no external key storage required.

ACTEL M2S090TS-FGG484I Security Architecture: SRAM-PUF and Tamper Response

The defining capability of the ACTEL M2S090TS-FGG484I is its Trusted Security subsystem. Unlike standard SmartFusion2 devices that rely on pre-provisioned keys, the TS variant uses SRAM-PUF technology to generate cryptographic keys intrinsically from the unique physical characteristics of each device’s silicon — keys that exist only when the device is powered and cannot be extracted or replicated. Combined with DPA-resistant 256-bit AES encryption, SHA-256 authentication, and active tamper detection with configurable response actions, the ACTEL M2S090TS-FGG484I provides a complete hardware security foundation for secure boot, encrypted firmware storage, and information assurance applications. Its nonvolatile flash architecture adds another security layer — the FPGA configuration cannot be read back, and the device powers up instantly without exposing a vulnerable external boot chain.

ACTEL M2S090TS-FGG484I Connectivity and Integration: A Complete Embedded Platform

Beyond its security capabilities, the ACTEL M2S090TS-FGG484I integrates the connectivity infrastructure needed for complex embedded designs — PCIe Gen2, dual SERDES transceivers, dual Gigabit Ethernet MACs, USB 2.0 OTG, CAN, and a DDR memory controller supporting DDR3, DDR2, and LPDDR1. The 484-pin FBGA package provides sufficient I/O for high-density board designs, and the device is supported by Microsemi’s Libero SoC design suite for seamless FPGA and firmware development. For engineers comparing the ACTEL M2S090TS-FGG484I against the standard M2S090, the TS suffix is the critical differentiator for any program with information assurance, anti-tamper, or secure key management requirements.

Sourcing the ACTEL M2S090TS-FGG484I: Trusted Security SoC FPGA Supply

Demand for the ACTEL M2S090TS-FGG484I is driven by the growing requirement for hardware-level security across industrial, communications, and defense-adjacent embedded programs. As a trusted supplier with verified inventory and full component traceability, we support procurement teams sourcing the ACTEL M2S090TS-FGG484I for both active development programs and production builds — with anti-counterfeit inspection and export-compliant global shipping on every order. Contact us today to confirm availability and request a competitive quote for the ACTEL M2S090TS-FGG484I.

• ACTEL M2S090TS-FGG484I integrates 86,184 logic cells with a hardened ARM Cortex-M3 processor on 65nm flash.
• “TS” Trusted Security variant adds SRAM-PUF intrinsic key generation — no external key storage required.
• DPA-resistant 256-bit AES encryption and SHA-256 authentication for hardware-rooted security.
• Active tamper detection with configurable response actions for information assurance applications.
• Nonvolatile flash configuration — instant-on with no external boot device or configuration memory.
• Integrated PCIe Gen2, dual SERDES, dual Gigabit Ethernet MACs, USB 2.0 OTG, and CAN peripherals.
• DDR3/DDR2/LPDDR1 memory controller for high-bandwidth external memory access.
• 484-pin FBGA package suited for high-density industrial and communications board designs.
• Industrial temperature rating supports reliable deployment across demanding operating environments.
• Urgent orders and long-term supply agreements for the ACTEL M2S090TS-FGG484I are available upon request.

Frequently Asked Questions (FAQ)

What Is the ACTEL M2S090TS-FGG484I and What Does the “TS” Mean?

The ACTEL M2S090TS-FGG484I is a SmartFusion2 Trusted Security SoC FPGA with 86,184 logic cells and a hardened ARM Cortex-M3 processor in a 484-pin FBGA package. The “TS” suffix identifies the Trusted Security variant, which adds SRAM-PUF intrinsic key generation, active tamper detection and response, and an enhanced security monitoring architecture not present in the standard M2S090.

How Does the ACTEL M2S090TS-FGG484I Differ From the Standard M2S090-FGG484I?

The core logic density, processor, connectivity, and package are identical between the two variants. The ACTEL M2S090TS-FGG484I adds the Trusted Security subsystem — SRAM-PUF key generation, DPA-resistant cryptographic engines, and tamper response — making it the correct choice for any program with information assurance, anti-tamper, or secure key management requirements.

What Is SRAM-PUF and Why Does It Matter for Security?

SRAM-PUF (Physical Unclonable Function) generates cryptographic keys from the unique physical characteristics of each device’s silicon at power-up. These keys are never stored — they exist only when the device is powered — making them impossible to extract through physical attack. This eliminates the vulnerability of external key storage while providing a unique, device-bound cryptographic identity for each ACTEL M2S090TS-FGG484I unit.

What Is the Operating Temperature Range of the ACTEL M2S090TS-FGG484I?

The ACTEL M2S090TS-FGG484I is rated for industrial-grade operation from –40°C to +85°C, suitable for industrial automation, communications infrastructure, and embedded computing applications across a wide range of operating environments.

How Do I Order the ACTEL M2S090TS-FGG484I?

You can submit an inquiry directly through our website contact form or email our sales team. We will respond with pricing, lead time, and availability within 24 hours for the ACTEL M2S090TS-FGG484I.