TI DS96F174ME/883
- Operating temperature range (°C): -55 to 125
- Rating: Military
- Number of transmitters: 4
- Number of receivers: 0
- Supply current (max) (µA): 50000
- Signaling rate (max) (Mbps): 10
- Common-mode range (V): -7 to 12
- Number of nodes: 32
- Duplex: Half
TI DS96F174ME/883 is a interface and logic device. Review the exact-part parameters, package and temperature requirements before approving a source or alternate.
Related Products For Your Business
DS96F174ME/883 Technical Overview: Verified Parameters Before Sourcing
TI DS96F174ME/883 is a interface and logic device cataloged in Interface, Logic & Bus for Aerospace & Defense programs. Unlike a family-level listing, the complete ordering code matters: package, temperature grade, speed option, screening level and shipment format can change with a suffix. The structured reference data for this exact part identifies Operating temperature range (°C) -55 to 125, Rating Military, Number of transmitters 4, Number of receivers 0.
These values are useful for initial BOM and sourcing review, but engineering approval should still use the latest manufacturer-controlled datasheet, package drawing and change notices. For availability, lot/date code and documentation, send Sparkle Electronics the complete DS96F174ME/883 requirement.
DS96F174ME/883 Key Specifications
| Parameter | DS96F174ME/883 |
|---|---|
| Operating temperature range (°C) | -55 to 125 |
| Rating | Military |
| Number of transmitters | 4 |
| Number of receivers | 0 |
| Supply current (max) (µA) | 50000 |
| Signaling rate (max) (Mbps) | 10 |
| Common-mode range (V) | -7 to 12 |
| Number of nodes | 32 |
| Duplex | Half |
| Isolated | No |
| Fault protection (V) | -25 to 25 |
What the Specifications Mean in a Design Review
For this interface and logic device, the main compatibility checks are logic function, channel count, propagation delay, voltage thresholds, drive current and bus compatibility. A replacement should not be approved from the family name alone. The values below need to be checked against the schematic, PCB footprint, power tree, timing constraints, thermal analysis and program qualification baseline:
- Operating temperature range (°C): -55 to 125
- Rating: Military
- Number of transmitters: 4
- Number of receivers: 0
- Supply current (max) (µA): 50000
- Signaling rate (max) (Mbps): 10
- Common-mode range (V): -7 to 12
Minimum and maximum values are not interchangeable with typical test values, and package-level compatibility does not guarantee pin, timing or firmware compatibility. Where the assembly is used in high-reliability equipment, confirm the required screening, traceability, lead finish and environmental documentation before purchase.
DS96F174ME/883 and Related TI Devices
The following pages provide useful internal comparison points. They are related sourcing options, not automatically drop-in replacements:
- TI ADC12D1000CIUT/NOPB — compare the exact architecture, package, speed or grade before substitution.
- TI ADC08D1500CIYB/NOPB — compare the exact architecture, package, speed or grade before substitution.
- TI ADC12D1800CIUT/NOPB — compare the exact architecture, package, speed or grade before substitution.
- TI ADC12D1600CCMPR — compare the exact architecture, package, speed or grade before substitution.
When comparing these devices, start with the exact function and architecture, then verify package and pinout, voltage rails, speed or bandwidth, operating temperature and qualification grade. If any of those differ, an engineering redesign or requalification may be required.
Package, Temperature and Ordering-Code Checks
The orderable code DS96F174ME/883 must be kept intact on the RFQ. Confirm the manufacturer marking, package drawing, terminal finish, moisture handling, operating-temperature requirement and packing format. For obsolete or long-stored material, define acceptable date codes and inspection criteria before quotation rather than after delivery.
Sourcing teams should also request the documentation appropriate to the program: Certificate of Conformance, packing and label photographs, lot/date-code information, traceability, visual inspection, X-ray or electrical testing when required. See our quality-control approach and the broader Interface, Logic & Bus selection.
Applications and Procurement Context
DS96F174ME/883 may be evaluated for Aerospace & Defense systems where its verified electrical limits, package and temperature range match the approved design. Typical work includes new production, repair, lifecycle extension and last-time-buy planning. Application labels describe catalog relevance; final suitability remains a system-level engineering decision.
Frequently Asked Questions
What are the main DS96F174ME/883 parameters?
The key reference values are Operating temperature range (°C) -55 to 125, Rating Military, Number of transmitters 4, Number of receivers 0. The complete table above should be reviewed together with the current manufacturer documentation and the operating conditions stated in that document.
Can another TI part replace DS96F174ME/883?
Not from the model name alone. Compare function, architecture, pinout, package, voltage, speed, temperature and qualification grade. The linked related devices are comparison starting points only.
What should be included in an RFQ?
Provide the exact part number, quantity, target delivery date, destination, acceptable date-code range and all documentation, screening or testing requirements. Submit the RFQ here.
Where can I review related components?
Browse Interface, Logic & Bus and the relevant Aerospace & Defense landing pages for other product families and sourcing guidance.
Need DS96F174ME/883 pricing, availability or traceability details? Contact Sparkle Electronics with the exact order code and procurement requirements.
