MICROCHIP MIC5265-1 8YD5-TR
- Output Voltage: 1.8 V
- Output Current: 150 mA
- Package/Case: 5-pin Thin SOT-23 (YD5)
- Regulator Type: Fixed-output low-dropout linear regulator
- Input Voltage Range: 2.7 V to 5.5 V
- Dropout Voltage: 310 mV maximum at 150 mA
- Ground Current: 125 µA maximum at 150 mA
- Shutdown Current: Less than 1 µA
- Output Capacitor: Stable with 1 µF ceramic capacitor
MICROCHIP MIC5265-1 8YD5-TR is a analog signal-chain device. Review the exact-part parameters, package and temperature requirements before approving a source or alternate.
Related Products For Your Business
MIC5265-1.8YD5-TR Technical Overview: Verified Parameters Before Sourcing
MICROCHIP MIC5265-1 8YD5-TR is a analog signal-chain device cataloged in Analog & Signal Chain for Aerospace & Defense programs. Unlike a family-level listing, the complete ordering code matters: package, temperature grade, speed option, screening level and shipment format can change with a suffix. The structured reference data for this exact part identifies Output Voltage 1.8 V, Output Current 150 mA, Package/Case 5-pin Thin SOT-23 (YD5), Regulator Type Fixed-output low-dropout linear regulator.
These values are useful for initial BOM and sourcing review, but engineering approval should still use the latest manufacturer-controlled datasheet, package drawing and change notices. For availability, lot/date code and documentation, send Sparkle Electronics the complete MIC5265-1.8YD5-TR requirement.
MIC5265-1.8YD5-TR Key Specifications
| Parameter | MIC5265-1.8YD5-TR |
|---|---|
| Output Voltage | 1.8 V |
| Output Current | 150 mA |
| Package/Case | 5-pin Thin SOT-23 (YD5) |
| Regulator Type | Fixed-output low-dropout linear regulator |
| Input Voltage Range | 2.7 V to 5.5 V |
| Dropout Voltage | 310 mV maximum at 150 mA |
| Ground Current | 125 µA maximum at 150 mA |
| Shutdown Current | Less than 1 µA |
| Output Capacitor | Stable with 1 µF ceramic capacitor |
| Output Accuracy | ±2% over temperature |
| Operating Temperature | -40°C to +125°C junction range |
| Packing | Tape-and-reel (-TR) |
What the Specifications Mean in a Design Review
For this analog signal-chain device, the main compatibility checks are offset, bias current, bandwidth, gain accuracy, noise, supply headroom and output-drive requirements. A replacement should not be approved from the family name alone. The values below need to be checked against the schematic, PCB footprint, power tree, timing constraints, thermal analysis and program qualification baseline:
- Output Voltage: 1.8 V
- Output Current: 150 mA
- Package/Case: 5-pin Thin SOT-23 (YD5)
- Regulator Type: Fixed-output low-dropout linear regulator
- Input Voltage Range: 2.7 V to 5.5 V
- Dropout Voltage: 310 mV maximum at 150 mA
- Ground Current: 125 µA maximum at 150 mA
Minimum and maximum values are not interchangeable with typical test values, and package-level compatibility does not guarantee pin, timing or firmware compatibility. Where the assembly is used in high-reliability equipment, confirm the required screening, traceability, lead finish and environmental documentation before purchase.
MIC5265-1.8YD5-TR and Related MICROCHIP Devices
The following pages provide useful internal comparison points. They are related sourcing options, not automatically drop-in replacements:
- MICROCHIP MIC4427YM — compare the exact architecture, package, speed or grade before substitution.
- MICROCHIP S25FL216K0PMFI01 — compare the exact architecture, package, speed or grade before substitution.
- MICROCHIP MRT130KP275CA — compare the exact architecture, package, speed or grade before substitution.
- MICROCHIP SG1525AJ/883B — compare the exact architecture, package, speed or grade before substitution.
When comparing these devices, start with the exact function and architecture, then verify package and pinout, voltage rails, speed or bandwidth, operating temperature and qualification grade. If any of those differ, an engineering redesign or requalification may be required.
Package, Temperature and Ordering-Code Checks
The orderable code MIC5265-1.8YD5-TR must be kept intact on the RFQ. Confirm the manufacturer marking, package drawing, terminal finish, moisture handling, operating-temperature requirement and packing format. For obsolete or long-stored material, define acceptable date codes and inspection criteria before quotation rather than after delivery.
Sourcing teams should also request the documentation appropriate to the program: Certificate of Conformance, packing and label photographs, lot/date-code information, traceability, visual inspection, X-ray or electrical testing when required. See our quality-control approach and the broader Analog & Signal Chain selection.
Applications and Procurement Context
MIC5265-1.8YD5-TR may be evaluated for Aerospace & Defense systems where its verified electrical limits, package and temperature range match the approved design. Typical work includes new production, repair, lifecycle extension and last-time-buy planning. Application labels describe catalog relevance; final suitability remains a system-level engineering decision.
Frequently Asked Questions
What are the main MIC5265-1.8YD5-TR parameters?
The key reference values are Output Voltage 1.8 V, Output Current 150 mA, Package/Case 5-pin Thin SOT-23 (YD5), Regulator Type Fixed-output low-dropout linear regulator. The complete table above should be reviewed together with the current manufacturer documentation and the operating conditions stated in that document.
Can another MICROCHIP part replace MIC5265-1.8YD5-TR?
Not from the model name alone. Compare function, architecture, pinout, package, voltage, speed, temperature and qualification grade. The linked related devices are comparison starting points only.
What should be included in an RFQ?
Provide the exact part number, quantity, target delivery date, destination, acceptable date-code range and all documentation, screening or testing requirements. Submit the RFQ here.
Where can I review related components?
Browse Analog & Signal Chain and the relevant Aerospace & Defense landing pages for other product families and sourcing guidance.
Need MIC5265-1.8YD5-TR pricing, availability or traceability details? Contact Sparkle Electronics with the exact order code and procurement requirements.
