MICRON MT48LC16M16A2P-6AIT:G
- Memory Type: SDR SDRAM
- Density: 256 Mbit
- Organization: 16M × 16 bits
- Package/Case: 54-pin TSOP II (P)
- Interface: Synchronous single-data-rate SDRAM
- Bank Architecture: Four internal banks
- Clock Frequency: 166 MHz class (-6A speed grade)
- Clock Period: 6 ns
- Supply Voltage: 3.3 V ±0.3 V
MICRON MT48LC16M16A2P-6AIT:G is a memory device. Review the exact-part parameters, package and temperature requirements before approving a source or alternate.
Related Products For Your Business
MT48LC16M16A2P-6A IT:G Technical Overview: Verified Parameters Before Sourcing
MICRON MT48LC16M16A2P-6AIT:G is a memory device cataloged in Memory & Storage for Aerospace & Defense programs. Unlike a family-level listing, the complete ordering code matters: package, temperature grade, speed option, screening level and shipment format can change with a suffix. The structured reference data for this exact part identifies Memory Type SDR SDRAM, Density 256 Mbit, Organization 16M × 16 bits, Package/Case 54-pin TSOP II (P).
These values are useful for initial BOM and sourcing review, but engineering approval should still use the latest manufacturer-controlled datasheet, package drawing and change notices. For availability, lot/date code and documentation, send Sparkle Electronics the complete MT48LC16M16A2P-6A IT:G requirement.
MT48LC16M16A2P-6A IT:G Key Specifications
| Parameter | MT48LC16M16A2P-6A IT:G |
|---|---|
| Memory Type | SDR SDRAM |
| Density | 256 Mbit |
| Organization | 16M × 16 bits |
| Package/Case | 54-pin TSOP II (P) |
| Interface | Synchronous single-data-rate SDRAM |
| Bank Architecture | Four internal banks |
| Clock Frequency | 166 MHz class (-6A speed grade) |
| Clock Period | 6 ns |
| Supply Voltage | 3.3 V ±0.3 V |
| Burst Length | 1, 2, 4, 8 or full page |
| Refresh | 8,192 refresh cycles per 64 ms |
| Operating Temperature | Industrial-temperature AIT grade |
What the Specifications Mean in a Design Review
For this memory device, the main compatibility checks are density, organization, bus width, access time, voltage, interface timing and package pinout. A replacement should not be approved from the family name alone. The values below need to be checked against the schematic, PCB footprint, power tree, timing constraints, thermal analysis and program qualification baseline:
- Memory Type: SDR SDRAM
- Density: 256 Mbit
- Organization: 16M × 16 bits
- Package/Case: 54-pin TSOP II (P)
- Interface: Synchronous single-data-rate SDRAM
- Bank Architecture: Four internal banks
- Clock Frequency: 166 MHz class (-6A speed grade)
Minimum and maximum values are not interchangeable with typical test values, and package-level compatibility does not guarantee pin, timing or firmware compatibility. Where the assembly is used in high-reliability equipment, confirm the required screening, traceability, lead finish and environmental documentation before purchase.
MT48LC16M16A2P-6A IT:G and Related MICRON Devices
The following pages provide useful internal comparison points. They are related sourcing options, not automatically drop-in replacements:
- ACTEL A1020B-PG84B — compare the exact architecture, package, speed or grade before substitution.
- ACTEL A2F500M3G-1CSG288I — compare the exact architecture, package, speed or grade before substitution.
- ACTEL A2F500M3G-FGG484I — compare the exact architecture, package, speed or grade before substitution.
- ACTEL A3P1000-1FGG484I — compare the exact architecture, package, speed or grade before substitution.
When comparing these devices, start with the exact function and architecture, then verify package and pinout, voltage rails, speed or bandwidth, operating temperature and qualification grade. If any of those differ, an engineering redesign or requalification may be required.
Package, Temperature and Ordering-Code Checks
The orderable code MT48LC16M16A2P-6A IT:G must be kept intact on the RFQ. Confirm the manufacturer marking, package drawing, terminal finish, moisture handling, operating-temperature requirement and packing format. For obsolete or long-stored material, define acceptable date codes and inspection criteria before quotation rather than after delivery.
Sourcing teams should also request the documentation appropriate to the program: Certificate of Conformance, packing and label photographs, lot/date-code information, traceability, visual inspection, X-ray or electrical testing when required. See our quality-control approach and the broader Memory & Storage selection.
Applications and Procurement Context
MT48LC16M16A2P-6A IT:G may be evaluated for Aerospace & Defense systems where its verified electrical limits, package and temperature range match the approved design. Typical work includes new production, repair, lifecycle extension and last-time-buy planning. Application labels describe catalog relevance; final suitability remains a system-level engineering decision.
Frequently Asked Questions
What are the main MT48LC16M16A2P-6A IT:G parameters?
The key reference values are Memory Type SDR SDRAM, Density 256 Mbit, Organization 16M × 16 bits, Package/Case 54-pin TSOP II (P). The complete table above should be reviewed together with the current manufacturer documentation and the operating conditions stated in that document.
Can another MICRON part replace MT48LC16M16A2P-6A IT:G?
Not from the model name alone. Compare function, architecture, pinout, package, voltage, speed, temperature and qualification grade. The linked related devices are comparison starting points only.
What should be included in an RFQ?
Provide the exact part number, quantity, target delivery date, destination, acceptable date-code range and all documentation, screening or testing requirements. Submit the RFQ here.
Where can I review related components?
Browse Memory & Storage and the relevant Aerospace & Defense landing pages for other product families and sourcing guidance.
Need MT48LC16M16A2P-6A IT:G pricing, availability or traceability details? Contact Sparkle Electronics with the exact order code and procurement requirements.
