WEDC W3H64M72E-400BI
- Memory Type: DDR2 SDRAM multi-chip package
- Density: 512 MB (4 Gbit)
- Organization: 64M × 72
- Data Rate: 400 Mb/s
- Temperature Grade: Industrial
- Package/Case: 208-ball PBGA
- Supply Voltage: 1.8 V ±0.1 V
- Internal Banks: 8 banks per DDR2 die
- Prefetch Architecture: 4n prefetch
WEDC W3H64M72E-400BI is a memory device. Review the exact-part parameters, package and temperature requirements before approving a source or alternate.
Related Products For Your Business
W3H64M72E-400BI Technical Overview: Verified Parameters Before Sourcing
WEDC W3H64M72E-400BI is a memory device cataloged in Memory & Storage for Aerospace & Defense, Satellite & Space programs. Unlike a family-level listing, the complete ordering code matters: package, temperature grade, speed option, screening level and shipment format can change with a suffix. The structured reference data for this exact part identifies Memory Type DDR2 SDRAM multi-chip package, Density 512 MB (4 Gbit), Organization 64M × 72, Data Rate 400 Mb/s.
These values are useful for initial BOM and sourcing review, but engineering approval should still use the latest manufacturer-controlled datasheet, package drawing and change notices. For availability, lot/date code and documentation, send Sparkle Electronics the complete W3H64M72E-400BI requirement.
W3H64M72E-400BI Key Specifications
| Parameter | W3H64M72E-400BI |
|---|---|
| Memory Type | DDR2 SDRAM multi-chip package |
| Density | 512 MB (4 Gbit) |
| Organization | 64M × 72 |
| Data Rate | 400 Mb/s |
| Temperature Grade | Industrial |
| Package/Case | 208-ball PBGA |
| Supply Voltage | 1.8 V ±0.1 V |
| Internal Banks | 8 banks per DDR2 die |
| Prefetch Architecture | 4n prefetch |
| Burst Length | 4 or 8 |
| Ball Pitch | 1.0 mm |
| Refresh Modes | Auto refresh and self refresh |
What the Specifications Mean in a Design Review
For this memory device, the main compatibility checks are density, organization, bus width, access time, voltage, interface timing and package pinout. A replacement should not be approved from the family name alone. The values below need to be checked against the schematic, PCB footprint, power tree, timing constraints, thermal analysis and program qualification baseline:
- Memory Type: DDR2 SDRAM multi-chip package
- Density: 512 MB (4 Gbit)
- Organization: 64M × 72
- Data Rate: 400 Mb/s
- Temperature Grade: Industrial
- Package/Case: 208-ball PBGA
- Supply Voltage: 1.8 V ±0.1 V
Minimum and maximum values are not interchangeable with typical test values, and package-level compatibility does not guarantee pin, timing or firmware compatibility. Where the assembly is used in high-reliability equipment, confirm the required screening, traceability, lead finish and environmental documentation before purchase.
W3H64M72E-400BI and Related WEDC Devices
The following pages provide useful internal comparison points. They are related sourcing options, not automatically drop-in replacements:
- WEDC EDI88512CA20NI — compare the exact architecture, package, speed or grade before substitution.
- WEDC WF1M32B-100G2UM3 — compare the exact architecture, package, speed or grade before substitution.
- WEDC EDI8L32512C12AC — compare the exact architecture, package, speed or grade before substitution.
- WEDC EDI88128LPS45CI — compare the exact architecture, package, speed or grade before substitution.
When comparing these devices, start with the exact function and architecture, then verify package and pinout, voltage rails, speed or bandwidth, operating temperature and qualification grade. If any of those differ, an engineering redesign or requalification may be required.
Package, Temperature and Ordering-Code Checks
The orderable code W3H64M72E-400BI must be kept intact on the RFQ. Confirm the manufacturer marking, package drawing, terminal finish, moisture handling, operating-temperature requirement and packing format. For obsolete or long-stored material, define acceptable date codes and inspection criteria before quotation rather than after delivery.
Sourcing teams should also request the documentation appropriate to the program: Certificate of Conformance, packing and label photographs, lot/date-code information, traceability, visual inspection, X-ray or electrical testing when required. See our quality-control approach and the broader Memory & Storage selection.
Applications and Procurement Context
W3H64M72E-400BI may be evaluated for Aerospace & Defense, Satellite & Space systems where its verified electrical limits, package and temperature range match the approved design. Typical work includes new production, repair, lifecycle extension and last-time-buy planning. Application labels describe catalog relevance; final suitability remains a system-level engineering decision.
Frequently Asked Questions
What are the main W3H64M72E-400BI parameters?
The key reference values are Memory Type DDR2 SDRAM multi-chip package, Density 512 MB (4 Gbit), Organization 64M × 72, Data Rate 400 Mb/s. The complete table above should be reviewed together with the current manufacturer documentation and the operating conditions stated in that document.
Can another WEDC part replace W3H64M72E-400BI?
Not from the model name alone. Compare function, architecture, pinout, package, voltage, speed, temperature and qualification grade. The linked related devices are comparison starting points only.
What should be included in an RFQ?
Provide the exact part number, quantity, target delivery date, destination, acceptable date-code range and all documentation, screening or testing requirements. Submit the RFQ here.
Where can I review related components?
Browse Memory & Storage and the relevant Aerospace & Defense, Satellite & Space landing pages for other product families and sourcing guidance.
Need W3H64M72E-400BI pricing, availability or traceability details? Contact Sparkle Electronics with the exact order code and procurement requirements.
